Connect with us

Issues

Samsung Galaxy S23 Ultra S-Pen randomly disconnects for some users, fix inside

Published

on

Samsung PENUP Android 14 update

Samsung Galaxy S23 Ultra comes with an S-Pen which makes it easy to use this large-screen phone but some customers are having issues with it. Various users of the Galaxy S23 Ultra smartphone have reported that their S-Pen randomly disconnects from the phone.

Multiple numbers of the corresponding device owners are using the Samsung community and Reddit platforms to tell the problem and ask if other knows the solution.

According to the users’ the S-Pen of their Galaxy S23 Ultra disconnects without any reason. They told that there is no definite reason for its disconnection, it disconnects randomly at a point and they have to put it back into the Galaxy S23 Ultra to reconnect.

Samsung S23 S-Pen disconnects

Samsung moderators in the community have responded to the customers’ concerns but didn’t tell when the fix is coming. We believe that the company is aware of this issue and will soon deliver a fix for it with a new software update. Until then, the below-mentioned hacks may help you.

Samsung S23 S-Pen disconnects

How to fix:

Some users of Samsung Galaxy S23 Ultra smartphones facing the S-Pen disconnection issue have found a temporary solution (via). Customers can try these workarounds until the company resolves the problem:

Resetting the S-Pen settings has worked for various Galaxy S23 Ultra. To do so, you need to access go to your phone’s “Settings” and enter the “Advanced features” section. Now select “S Pen”, tap the “More” (three-dot) menu, and finally hit the “Reset” button.

Another possible solution for this issue is to enable the “Keep S Pen connected” feature. This option comes disabled by default to save battery life. To enable it, you again need to reach the “S Pen” settings through “Settings” >> “Advanced features”. Now go to “More S Pen Settings” and turn on the toggle for “Keep S Pen connected”.

There could be many professions but writing about tech is something that I've chosen and it's what I've been doing. Besides this, I like sketching, roaming, and shopping. I am a casual person and like to taste different dishes and Chinese is my favourite.

Issues

Samsung Galaxy Z Fold 4 users facing severe issues while opening the display 

Published

on

Samsung Fold Flip 5 storage

Galaxy fans and tech enthusiasts are waiting for the launch of the next generation of foldable phones. On the other side, the consumers of Samsung Galaxy Z Fold 4 are facing severe issues while opening the display of their foldable phone, and this is annoying them a lot.

As per the information, some users of fourth-generation foldable phones are having trouble opening their device’s display. The report says, the display of the Galaxy Z Fold 4 smartphone isn’t opening fully and it even leads to a screen break when tried for some.

Some users stated that the display of their foldable device didn’t open after playing a game for a few minutes at full brightness. While another user says, his phone’s hinge was suddenly faulty after leaving it next to a hot tub. Hence, the reason behind this could be excessive heat.

Moving on, the blockage appeared to be comprised of the same bristles and tape that fit the brushes that line the hinge. These brushes have been a part of the hinge design and their purpose is to clear out dirt and debris from the hinge. The report also indicates the glue that holds these brushes in place is starting to diminish.

Follow our socials  Google News | Telegram | X/Twitter | Facebook | WhatsApp

However, Samsung finally acknowledged the Galaxy Z Fold 4 display not opening properly issues and suggested customers to contact their local Customer Service representative. Below you can read Samsung’s official statement.

  • “Samsung is committed to providing the best possible mobile experience to customers and conduct a series of rigorous, industry-validated tests designed specifically to simulate real-world conditions. We encourage customers with questions regarding their Samsung device to contact their local Customer Service representative.”

Samsung Fold 4 One UI 5.0 Canada

Via

Continue Reading

Issues

S Pen smells like burnt plastic, Galaxy S24 Ultra users concerned

Published

on

One UI 6.1 US unlocked

Following the Note series, Samsung launched the Galaxy S22 Ultra with an S-Pen, which has been maintained up to the S24 Ultra and is expected to continue in subsequent models. Owners of the Samsung Galaxy S24 Ultra have encountered an unexpected issue with their S Pen stylus that is it smells like burnt plastic. This concern has been discussed by users on Reddit and addressed in the Samsung Community forums.

Samsung is already aware of these concerns and the community moderator explained that the smell is due to the S Pen’s storage location near the phone’s internal components, which generate heat during use. This heat can cause the S Pen’s plastic to warm up and emit a smell, which is unusual but not harmful.

Follow our socials → Google News | Telegram | X/Twitter | Facebook | WhatsApp

Furthermore, the moderator assured users that this is normal and will fade as the device cools. He compared it to the temporary smell in a car that has been parked in the sun.

This concern is not exclusive to the S24 Ultra, as it was also reported with the Galaxy S22 Ultra. If you notice a burnt smell from your S-Pen, it is a known and expected behavior, not a cause of concern.

‘This isn’t anything to be concerned about. While the S Pen is in its holster, it is close to the internal components of the phone, which will generate heat while in use, and cause the plastic to heat up. This can smell like burning, but it is similar to the smell you might experience after leaving your car in the sun for a few hours. The seats and plastic fittings in the vehicle might smell hot, but this will diminish after it cools,’ said Moderator.

Samsung Galaxy S24 S-Pen smell

VIA

Continue Reading

Issues

Samsung to fix LockStar app’s clock overlap bug in a future update

Published

on

Samsung Lockstar bug fix

Samsung users have been facing a lock screen clock overlap bug on the LockStar Good Lock module, which causes the clock display to overlap when the screen turns off. Samsung has acknowledged this issue, and a firmware update is in the works to resolve it.

The error appears intermittently, so restarting the device is a temporary solution. Users are noticing an unusual flicker when the screen dims before turning off.

Follow our socials → Google News | Telegram | X/Twitter | Facebook | WhatsApp

A Samsung community moderator has apologized for the inconvenience caused by the LockStar bug and assured that a software update to fix the clock overlap is coming. However, the exact timing of this update is not confirmed yet due to some reasons.

As a temporary solution, users are advised to reboot their devices if they encounter the clock overlap. If the issue persists, it is recommended to disable LockStar until the software update is available.

Samsung LockStar Clock bug

Continue Reading