Connect with us

One UI

Samsung Galaxy Tab S6 grabbing November 2020 security patch

Published

on

Samsung Galaxy Tab S6 Lite

Samsung started to rollout the November 2020 security update for the Galaxy devices before the start of the month. The Galaxy Z Fold 2 was the first device to receive this update at the end of October itself and then followed by other smartphones including Galaxy XCover Pro and Galaxy A02 Core. These new optimizations are also rolling out for several Galaxy smartphones and tablets.

The company is now sending a new software update for its Galaxy Tab S6 devices that brings the latest November 2020 security patch. This update installs the latest security patch for improved system security and device stability.

These security improvements and optimization for the Samsung Galaxy Tab S6 come with build version T865XXU4BTK2. Other than the security improvements this firmware does not add any new features to the device.

Read More: How to fix Screen Overlay error appears on Galaxy devices

To check for the update manually on your Galaxy devices go to Settings > Software Update > then tap on Download and install.

Previously, these Tab S6 devices have received the September 2020 security patch in the month of October that also brought the security optimizations despite of any new features.

Top Features:

The Galaxy Tab S6 is a premium tablet from Samsung that comes with many high-end features including a 10.4-inch Super AMOLED display with a 7040mAh massive battery back up. It is powered by an Octa-core processor along with the power for S-Pen for increased productivity and much more.

 

Chanakya Shrutam is the lead writer and Editor-in-chief at Sammyfans.com. He is experienced in the field of App development for Android, Machine learning, and graphics designing. Most of the time he writes news articles and stays in front of his computer but he also takes some time off to practice calligraphy with new fountain pens.

Android 14

Download/Install One UI 6 Beta ROM for Galaxy S23, S23 Plus, S23 Ultra [Beta 4/5]

Published

on

Samsung One UI 6

Last month, Samsung rolled out the first and second Beta builds of its Android 14 firmware. Currently, Samsung’s Galaxy S23, S23 Plus, and S23 Ultra devices are eligible to download and install One UI 6 Beta. The official way to get Beta is registration through Members, while there’s a custom installation way as well.

Courtesy of BredzProh (senior member at XDA Forums), the official One UI 6 Beta builds are available for download and install on the Galaxy S23 series. For Europe, the company is using a universal CSC Code – EUX, making it easier (indirectly) to install the firmware manually.

Follow our socials → Google News, Telegram, X (formerly Twitter), Facebook

DOWNLOAD ONE UI 6 BETA ROM

The Beta Program is only accessible for T-Mobile consumers in the United States along with the user having a carrier-unlocked smartphone. Do note that the download links are not just the way to get Beta in any country as you need to perfectly flash firmware through the ADB method. Links below:

Galaxy S23 Ultra

SM-S918B

AWF7 → ZWH8 [Beta 1]

AWGJ → ZWHO

AWH3 → ZWHO

ZWH8 → ZWHO [Beta 2]

ZWHO ➝ ZWI8 [Beta 3]

ZWI8 ➝ ZWIB

ZWIB ➝ ZWIC [Beta 4]

ZWIC ➝ ZWIK [Beta 5]

 

SM-S918U1

AWFD → ZWH8 [Beta 1]

ZWH8 → ZWHO [Beta 2]

ZWHO ➝ ZWI8 [Beta 3]

ZWI8 ➝ ZWIB

ZWIB ➝ ZWIC [Beta 4]

ZWIC ➝ ZWIK [Beta 5]

SM-S918U

AWFD → ZWH8 [Beta 1]

ZWH8 → ZWHO [Beta 2]

ZWHO ➝ ZWI8 [Beta 3]

ZWI8 ➝ ZWIB

ZWIB ➝ ZWIC [Beta 4]

ZWIC ➝ ZWIK [Beta 5]

 

Galaxy S23 Plus

SM-S916B

AWH3 → ZWHO [B1]

ZWHO ➝ ZWI8 [B3]

ZWI8 ➝ ZWIB

ZWIB ➝ ZWIC

ZWIC ➝ ZWIK [N/A]

 

Galaxy S23

SM-S911B

AWH3 → ZWHO [B1]

ZWH8 → ZWHO

AWH3 ➝ ZWI8 [5.1 to B3]

ZWI8 ➝ ZWIB

ZWIB ➝ ZWIC

ZWIC ➝ ZWIK

 

SM-S911U1

AWGH → ZWH8 [B1]

ZWH8 → ZWHO [B2]

ZWHO ➝ ZWI8 [B3]

ZWI8 ➝ ZWIB

ZWIB ➝ ZWIC

ZWIC ➝ ZWIK

Samsung One UI 6

How to install [ADB Method]

  • Download the ROM (right build) for your Galaxy device.
  • Find the file in My Files and change the extension from .bin to update.zip
  • Download and install ADB on your PC.
    • Make sure to have “C:\Android\platform-tools” added to “Path” in System variables.
  • On your phone, go to Settings > About phone > Software information
  • Repeatedly tap on the build number to activate Developer options, and then open it
  • From Developer options, find and enable “USB debugging”
  • Connect your phone to your PC.
    • Eensure it has Samsung Driver installed from “Smart Switch for PC.”
  • You may enable the “Always allow from this computer” if it’s your personal PC.
  • Tap on Allow.

Installation

Your data will be wiped.

  • On your PC, move the “update.zip” file to “C:\Android\platform-tools”.
  • Click on the Start Button.
  • Click on Windows Terminal (Admin) or PowerShell (Admin).
  • In the Terminal, type “adb devices” and execute it.
    • If you didn’t enable “Always allow from this computer”, the pop up will appear again on the phone. Tap on Allow.
  • Type “adb reboot recovery” and execute it.
  • Your phone will boot to Recovery Mode.
  • Navigating with the volume buttons and selecting the power button, go to “Apply update from ADB”
    • If you want to force exit from this screen, hold down the Volume down and Power buttons.
  • Back to the PC, type: “.\adb sideload “C:\Android\platform-tools\update.zip” and execute it.
  • The installation process will start and One UI 6.0 beta will be installed.
  • After the update process has finished, back to the PC, execute “adb reboot recovery” again.
  • Go to “Wipe cache partition” and select Yes.
  • Then select “Reboot system now”.

Note:

  • Your data will be wiped.
  • If you get an error, you may have downloaded the wrong build, or your device doesn’t support the beta program at all. If you are sure that you have downloaded the right build, try again using different cables, USB ports, or PCs.)
  • Trigger manual firmware installation at your own risk.

Alternative Way

  • Here is how you can download and install Samsung One UI Beta without PC – Read More
Continue Reading

One UI

Samsung Galaxy Tab A7 Lite starts getting One UI 5.1.1 update

Published

on

Samsung Galaxy Tab A 7 Lite One UI 5.1.1 update

Samsung has begun rolling out the stable One UI 5.1.1 update for its Galaxy Tab A7 Lite. The update brings a number of new features and improvements to the devices, as well as updates to several stock apps.

Users of Samsung Galaxy Tab A7 Lite can identify the One UI 5.1.1 update with firmware ending with T225XXU4CWI2 and a package size of around 1.1GB. The update is currently available in European countries and will soon expand to other markets.

One UI 5.1.1 for Samsung Galaxy 

One of the features is better app previews and switching on the Recents screen. You can see how apps will look after you open them, and easily switch from pop-up view to split screen or vice versa. You can also check minimized apps with the S Pen.

Another feature is Quick Share to send files to contacts anytime and anywhere. You can also share files privately by setting expiration dates, canceling sharing, or preventing resharing.

More options are now available for watermarks, effects, and remastering in Camera and Gallery. You can customize the date and time separately for watermarks, see enhanced remaster previews, apply effects more easily, and copy and paste effects from one picture to another.

Some changes have also been made in My Files, Device Care, Lock screen, and Samsung Internet. You can drag and drop with two hands, clear app caches, manage memory usage, change modes from the Lock screen, and customize the layout in Samsung Internet.

How to update:

To install the latest update, just need to open Settings, press on the Software Update option, and then click on the Download and Install option. Follow the on-screen instructions to install the latest update.

Samsung Galaxy Tab A 7 Lite One UI 5.1.1 update

Continue Reading

One UI 6.0

One UI 6 Beta 5 for Samsung Galaxy S23 arrives: Fixes touch, camera, rebooting, and more issues

Published

on

Samsung Galaxy S23 One UI 6 Beta 5 update

Samsung is rolling out a One UI 6 Beta 5 update for Galaxy S23, Galaxy S23 Plus, and Galaxy S23 Ultra smartphone users in the UK. The update is part of the One UI 6 Beta program, which allows users to test the latest features and improvements before the stable release.

One UI 5 Beta 6 update of the Samsung Galaxy S23 series can be identified through PDA ending with ZWIK and weighs around 750 MB. It brings several bug fixes and enhancements to the Galaxy S23 series devices.

Follow our socials → Google NewsTelegramX (formerly Twitter)Facebook

The update fixes a bundle of issues that users encountered in the last beta version, mainly related to call recording, ghost touch, Camera, motion photo, Maintenance mode, and more.

WHAT’S NEW

  • Fixed the problem of not being able to record during a call
  • Fixed no touch at the bottom of the screen or
    ghost touch issue
  • Fixed the issues of stuck after entering camera, forced termination. and not being able to take pictures
  • Fixed the problem of not being able to use Motion Photo
  • Fixed infinite rebooting problem when entering Maintenance Mode
  • Many other improvements

Samsung Galaxy S23 One UI 6 Beta 5 update

VIA

Continue Reading